Reduce Heating Bills, Reduce Energy Bills with g-save
Reduced price for a limited time only until end of February 2010
Whether your home and hot water is heated by gas, oil or LPG, the g-save could save you ££££s and reduce your gas bills.
With the average annual home gas bill now at £1,300, now is the time to consider fitting this 'green box' to your heating/hot water system to lower your gas bills and reduce energy consumption.
The g-save was tested by Good Housekeeping Magazine (February 2009), where savings were 31% during the week tested. Click here to read the article.
The g-save is a tried-and-tested, patented product that uses 'smart' technology to optimise the operation of your central heating boiler, improving efficiency to greatly reduce gas consumption and lower heating bills.
Only available from gas-elec.
g-save Video Presentation
If you are having difficulty viewing the video, please click here to download (47MB)
Due to the change in VAT, the cost of g-save is now £156 £135.
How it Works
The g-save has two electronic timers which pulse at different pre-set times 24 hours a day, seven days a week. One timer is wired into the room thermostat wiring and the other is wired into the hot water cylinder thermostat wiring.
In a standard domestic system there is a time lag in the heating process. The time lag is caused because the thermostat demands heat from the boiler and the boiler responds, but it takes time for the heat to get around the system, and for the thermostat to register that the water or room is now hot enough. The thermostat then stops demanding heat; but the heat that is already in the system still has to work through. In effect, because of this time-lag, the water or room is overheated.
The g-save economiser pulses the demand for heat so that the latent heat in the system that is still moving around is used to full effect, even when the boiler is not active.
Click on the PDF symbols to download the various installation instructions and wiring diagrams:
g-save installation guide and notes Update 1
Typical heating system wiring diagram
Typical heating system wiring diagram with g-save
The g-save, once installed, cuts gas consumption by, on average, 22% making it a great way to reduce heating bills. You can look forward to lower utility bills, as well as reduced CO2 emissions from your boiler. If all the 13 million gas-fuelled homes in the UK had the economiser fitted, and if they reduced their fuel consumption by only 20%, that would cut emissions by 8.5 million tonnes of CO2 every year!
The g-save must be installed by a competent person.
The g-save costs £156 £135 incl VAT and p&p (a payback could be achieved within 12-16 months).
Refer your friends and get your money back!
As an individual customer you can get a full refund on the cost of the g-save with your own unique reference code, which will be provided by the website when you place your order.
When six of your friends or family purchase their own g-save under your referral code, you will receive a refund of the cost of your g-save.
So you will get your g-save FREE and you will benefit from substantial savings on your home energy bills. Buy Now
Call 0800 587 0666 or Click Here to purchase online
Reg. Nr 171224
